Engineering, 06.11.2019 19:31 hbked23

Write a program that is called "gradereport" this program must incorporate the use of the following: 1) user input 2) if statements 3) while loop this program reads the user input for a grade and prints the comments accordingly. ensure that your program can handle inputs such as 91, 92, 105, -1 and so forth. your program should prompting the user 3 times if user enters bad/invalid data and be user friendly which will alert the user of their wrong doing immediately after the 3rd time ask the user (do you want to continue yes or no) if yes you should send the user back thru the code. incorporated the use of the equalsignorecase () method to take in all inputs whether it’s a or a.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

You know the right answer?

Write a program that is called "gradereport" this program must incorporate the use of the following:...

Questions