subject
Engineering, 06.11.2019 22:31 anthony4034

Acontinuous and aligned fibrous reinforced composite having a cross-sectional area of 970 mm2 (1.5 in.2) is subjected to an external tensile load. if the stresses sustained by the fibre and matrix phases are 215 mpa (31,300 psi) and 5.38 mpa (780 psi), respectively, the force sustained by the fibre phase is 76,800 n (17,265 lbf), and the total longitudinal composite strain is 1.56 × 10–3, determine the following:

(a) the force sustained by the matrix phase

(b) the modulus of elasticity of the composite material in the longitudinal direction

(c) the moduli of elasticity for fibre and matrix phases

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Acontinuous and aligned fibrous reinforced composite having a cross-sectional area of 970 mm2 (1.5 i...
Questions
question
Mathematics, 07.09.2021 19:00
question
History, 07.09.2021 19:00
question
Arts, 07.09.2021 19:00
question
Mathematics, 07.09.2021 19:00
Questions on the website: 13722362