Consider laminar, parallel flow past an isothermal flat plate of length /, providing an average heat transfer coefficient of . if the plate is divided into 1 smaller plates, each of length determine an expression for the ratio of the heat transfer coefficient averaged over the 1 plates to the heat transfer coefficient averaged over the single plate, . repeat problem 7.11 for the case when the boundary layer is tripped to a turbulent condition at its leading edge.

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?