subject
Engineering, 07.11.2019 01:31 Sinless60951

Afour lane undivided multilane highway (two lanes in each direction) has 11 ft lanes and 5 ft shoulders. at one point along the highway there is a 4% upgrade that is 0.62 mi long. there are 15 access points along this grade. the peak hour traffic volume is 2340 vehicles, with 10% single-unit trucks and 10% tractor-trailer trucks, and 620 of these vehicles arrive in the most congested 15-min period. this traffic stream is primarily commuters (fp=1.0). the posted speed limit is 65 mi/hr. a. calculate the los b. to improve the level of service, the local transportation agency is considering reducing the number of access points by blocking some driveways and rerouting their traffic. how many of the 15 access points must be blocked to achieve los c? b.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
question
Engineering, 06.07.2019 02:30
Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.
Answers: 3
You know the right answer?
Afour lane undivided multilane highway (two lanes in each direction) has 11 ft lanes and 5 ft should...
Questions
question
Mathematics, 03.12.2019 23:31
question
Biology, 03.12.2019 23:31
Questions on the website: 13722361