Aglass bulb with radius r = 15 cm is filled with water vapor at a temperature of t = 500 k. on the exterior of the bulb a spot with area a = 2.0 mm2 is placed in contact with liquid nitrogen. this causes the temperature of the spot to drop well below 0◦c. when the gaseous water molecules strike this area from inside they immediately freeze effectively removing them from the gas. determine how much time it takes for the pressure in the bulb to reduce to half its original value. assume the temperature of the gas in the container remains at 500 k

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.