subject
Engineering, 08.11.2019 18:31 dominikbatt

In this exercise you are given a polynomial and you will write a code that outputs an antiderivative of the polynomial. **write a function in the file that begins with function b=polint(p) format compact syms x which accepts as an input a polynomial p. a polynomial will be written in symbolic form through the standard basis (you may find it to review exercise 3 of the current project). the function has to calculate indefinite integral of the polynomial assigning a value 1 to an arbitrary constant. the output has to be a polynomial written in symbolic form through the standard basis as well. do not use the matlab built-in function int(p) within the

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
In this exercise you are given a polynomial and you will write a code that outputs an antiderivative...
Questions
Questions on the website: 13722363