Design an active bandpass filter subject to the following constraints:

•cascade a first-order active lowpass filter, a first-order active highpass filter and possibly aninverting amplifier.
•fc1= 300hz and fc2= 3khz.
•maximum gain (gain at f0) in the passband 1 shall be 20db
•using standard resistor values available in the lab room.
•draw the schematic diagram of your finished design.

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10