Engineering, 10.11.2019 06:31 MayFlowers

In a thermal system, water enters a 25-mm-diameter and 23-m-long circular tube with a mass flow rate of 0.1 kg/s at 25 degree c. the heat transfer from the tube surface to the water can be expressed in terms of heat flux as q"s(x) = ax. the coefficient a is 400 w/m^3, and the axial distance from the tube inlet is x measured in meters. determine
(a) an expression for the mean temperature t_m(x) of the water,
(b) the outlet mean temperature of the water, and
(c) the value of a uniform heat flux q" s on the tube surface that would result in the same outlet mean temperature calculated in part (b). evaluate water properties at 35 degree c.
(d) discuss why water properties are evaluated at 35 degree c.
(e) evaluate the (c) and (d) when inlet temperature of water is 15 degree c.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

Engineering, 06.07.2019 02:30

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

Answer

You know the right answer?

In a thermal system, water enters a 25-mm-diameter and 23-m-long circular tube with a mass flow rate...

Questions