Engineering, 12.11.2019 23:31 djub
Amosfet is connected in the source-follower configuration and employed as the output stage of a cascade amplifier. it is required to provide an output resistance of 200ω. if the mosfet has kn’=0.4 ma/v2 and is operated at vov=0.25v, find the required w/l ratio. also specify the dc bias current id. if the amplifier load resistance varies over the range 1kω to 10kω, what is the range of av of the source follower?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Amosfet is connected in the source-follower configuration and employed as the output stage of a casc...
Questions
English, 19.11.2019 03:31
