subject
Engineering, 13.11.2019 01:31 aschunyhung

Superheated steam at 20 mpa, 560°c enters the turbine of a vapor power plant. the pressure at the exit of the turbine is 0.5 bar, and liquid leaves the condenser at 0.4 bar at 75°c. the pressure is increased to 20.1 mpa across the pump. the turbine and pump have isentropic efficiencies of 81 and 85%, respectively. cooling water enters the condenser at 20°c with a mass flow rate of 70.7 kg/s and exits the condenser at 38°c. for the cycle, determine a. the mass flow rate of steam, in kg/s. b. the thermal efficiency.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
You know the right answer?
Superheated steam at 20 mpa, 560°c enters the turbine of a vapor power plant. the pressure at the ex...
Questions
question
Mathematics, 17.10.2021 01:20
question
Mathematics, 17.10.2021 01:20
question
Mathematics, 17.10.2021 01:20
question
Mathematics, 17.10.2021 01:30
Questions on the website: 13722367