Design a human body temperature indicator system for a hospital bed. your system takes an 8-bit input representing a person’s body temperature, which can range from 0 to 255. if the measured temperature is 95 or less, set output a to 1. if the temperature is 96 to 104, set output b to 1. if the temperature is 105 or above, set output c to 1. use an 8-bit magnitude comparator and additional logic as required.

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?