Engineering, 13.11.2019 20:31 yvngtazz
An inexpensive food and beverage container is fabricated from 25-mni-thick polystyrene (k = 0.023 w/m k) and has interior dimensions of 0.8 m times 0.6 m times 0.6 m. under conditions for which an inner surface temperature of approximately 2 degree c is maintained by an ice-water mixture and an outer surface temperature of 20 degree c is maintained by the ambient, what is the heat flux through the container wall? assuming negligible heat gain through the 0.8 m times 0.6 m base of the cooler, what is the total heal load for the prescribed conditions?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 19:20
Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain
Answers: 2
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
Engineering, 06.07.2019 04:10
Agas mixture with a compostion of 55 methane, 30% propane, and 15 butane by volume) is compressed from 1 bar and 25°c to 9bar in a compressor with an isentropic efficiency of 85%. the environment has a temperature of to25 c. determine (a) the exit temperature of the mixture (b) the specific work required to run the compressor (c) the specific entropy generation of the process (d) the specific exergy destruction of the process (e) the second law efficiency of the compressor
Answers: 3
You know the right answer?
An inexpensive food and beverage container is fabricated from 25-mni-thick polystyrene (k = 0.023 w/...
Questions
Spanish, 08.07.2019 14:30
Health, 08.07.2019 14:30
Mathematics, 08.07.2019 14:30
Physics, 08.07.2019 14:30
Biology, 08.07.2019 14:30
History, 08.07.2019 14:30
English, 08.07.2019 14:30
English, 08.07.2019 14:30
Health, 08.07.2019 14:30
