subject
Engineering, 13.11.2019 23:31 bremarie102013

Lows over an airfoil result in the formation of vortices in the downstream wake. these structures are shed much like that which is seen for circular cylinders and the frequency of shedding is important in the understanding of the flow field. this is particularly important for micro uav's as they affect the flight characteristics of these small vehicles. to determine the shedding frequency, f, of the wake, researchers decide to run a model test with a 1/10 scale model wing in a water tunnel. the frequency of oscillation, f, is a function of the water speed, u, the chord length of the airfoil, c, the angle of attack, a, the density of the water, p, and the viscosity of the water, μ. at full scale, 1-10 m/s, c-1.2 m and, α-0.089 radians (i0' (a) (10 pts) find the non-dimensional groups associated with the problem. use c, u, and rho as the repeating variables. (b(10 pts) what should the parameters a, c, and u be for model test. (c) (5 pts) if the frequency measured in the water tunnel is 75 1/s, estimate the frequency for the full-scale wing. (d) (5 points) if the proposed speed for the model test is too fast, what could you do to match the 11 terms and reduce the flow speed at the same time? show how your proposed solution reduce the flow speed.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
Lows over an airfoil result in the formation of vortices in the downstream wake. these structures ar...
Questions
question
Chemistry, 02.05.2021 21:00
question
English, 02.05.2021 21:00
Questions on the website: 13722363