subject
Engineering, 14.11.2019 01:31 victoriahuntley12148

An engineer is studying the mileage performance characteristics of five types of gasoline additives. in the road test he wishes to use cars as blocks; however, because of a time constraint, he must use an incomplete block design. he runs the balanced design with the five blocks that follow. analyze the data from this experiment (use α-0.05) and draw conclusions.

car

additive 1 2 3 4 5

1 17 14 13 12

2 14 14 13 10

3 12 13 12 9

4 13 11 11 12

5 11 12 10 8

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
An engineer is studying the mileage performance characteristics of five types of gasoline additives....
Questions
question
Mathematics, 29.08.2020 18:01
Questions on the website: 13722367