subject
Engineering, 14.11.2019 01:31 cxttiemsp021

An ocean thermal energy conversion (otec) power plant built in hawaii in 1987 was designed to operate between the temperature limits of 86of at the ocean surface and 41 o f at a depth of 2100 ft. about 13,300 gpm of cold seawater was to be pumped from deep ocean through a 40-inch diameter pipe to serve as the cooling medium or heat sink. if the cooling water experiences a temperature rise of 6 o f and the thermal efficiency is 2.5 percent, determine the amount of power generated. take the density of seawater to be 64 lbm/ft3 .

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
An ocean thermal energy conversion (otec) power plant built in hawaii in 1987 was designed to operat...
Questions
Questions on the website: 13722363