Engineering, 14.11.2019 06:31 Kencharlot

To determine the acceleration at point c, the angular velocity of link bc or dc needs to be determined. this can be done by writing the velocity of point c in using the path abc and the path adc. there will be two unknowns and two equations. write an expression for the horizontal component of vc using path abc.

b. write an expression for the horizontal component of vc using path adc.

c. use the results from parts a and b to determine the angular velocity of link cd. let a counterclockwise rotation be positive.

d. what is the angular acceleration of link cd? let a counterclockwise angular acceleration be positive.

e. now use the known angular velocity and angular acceleration of link cd to determine the acceleration at point c. what is the magnitude of the acceleration?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

To determine the acceleration at point c, the angular velocity of link bc or dc needs to be determin...

Questions