subject
Engineering, 14.11.2019 07:31 Geo777

If d=0.25m and d=0.40m. assume headloss from the contraction to the end of the pipe can be found as hų = 0.9 (v is velocity in the pipe of diameter d). what height, h, will cause cavitation if atmospheric pressure is 100 kpa (abs)? what is the discharge when cavitation begins? water t-20°c

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
question
Engineering, 06.07.2019 03:10
Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window
Answers: 3
question
Engineering, 06.07.2019 03:10
What is the direction and how to operate the lathe?
Answers: 2
question
Engineering, 06.07.2019 04:10
Water flows at the rate of 200 i/s upwards through a tapered vertical pipe. the diameter at marks(3) clo5) the bottom is 240 mm and at the top 200 mm and the length is 5m. the pressure at the bottom is 8 bar, and the pressure at the topside is 7.3 bar. determine the head loss through the pipe. express it as a function of exit velocity head.
Answers: 3
You know the right answer?
If d=0.25m and d=0.40m. assume headloss from the contraction to the end of the pipe can be found as...
Questions
question
Social Studies, 01.09.2019 21:30
question
Mathematics, 01.09.2019 21:30
question
Chemistry, 01.09.2019 21:30
Questions on the website: 13722361