subject
Engineering, 14.11.2019 20:31 loveuncondition

Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater. superheated vapor enters the turbine at 10 mpa, 480 c and the condenser pressure is 6 kpa. steam expands through the first stage turbine where some is extracted and diverted to a closed feedwater heater at 0.7 mpa. condensate drains from the feedwater heater as saturated liquid at 0.7 mpa and is trapped into the condenser. the feedwater leaves the heater at 10 mpa and a temperature equal to the saturation temperature at 0.7 mpa.

for the cycle of problem 8.49, reconsider the analysis assuming the pump and each turbine stage have isentropic efficiencies of 80%.

determine:

a) the rate of heat transfer to the working fluid passing through the steam generator in kj per kg of steam entering the first stage turbine.

b) the thermal efficiency

c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water in kj per kg of steam entering the first stage turbine.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater....
Questions
Questions on the website: 13722361