Engineering, 15.11.2019 04:31 biyah40
How would lift be different if the car ford was never made and how is life with ford
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
How would lift be different if the car ford was never made and how is life with ford...
Questions
History, 20.08.2019 00:50
History, 20.08.2019 00:50
Social Studies, 20.08.2019 00:50
Mathematics, 20.08.2019 00:50
Mathematics, 20.08.2019 00:50
Mathematics, 20.08.2019 00:50
Health, 20.08.2019 00:50
Mathematics, 20.08.2019 00:50
English, 20.08.2019 00:50
Biology, 20.08.2019 00:50
