subject
Engineering, 16.11.2019 03:31 chamarabrown6529

Can crushers us recycle in a space efficient way which is good for saving the earth and for giving you more room in your apartment. let us model the illustrated crusher as a planar mechanism that is subjected to the pushing force p on the lower "l-shaped" handle, i. e. link cde. note that link cde is one solid piece, pinned at d and e. knowing that the orange horizontal member a b has a square peg at a that slides vertically in the slot on the blue frame, that the can is centered under the pin at b and that p = 45 n, θ = 5 o , ϕ = 15 o , a = 70 mm, b = 235 mm, c = 80 mm, and d = 25 mm, determine the force magnitude f in n exerted on the can from the mechanism.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Can crushers us recycle in a space efficient way which is good for saving the earth and for giving...
Questions
question
Mathematics, 25.09.2020 18:01
question
Social Studies, 25.09.2020 18:01
Questions on the website: 13722361