subject
Engineering, 18.11.2019 20:31 neilleggon24

Consider a model of a wing-body shape mounted in a wind tunnel. the flow conditions in the test section are standard sea-level properties with a velocity of 100 m/s. the wing area and chord are 1.5 m2 and 0.45 m, respectively. using the wind tunnel force and moment-measuring balance, the moment about the center of gravity when the lift is zero is found to be -12.4 n-m. when the model is pitched to another angle of attack, the lift and moment about the center of gravity are measured to be 3675 n and 20.67 n-m, respectively. calculate the value of the moment coefficient about the aerodynamic center and the location of the aerodynamic center.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
Consider a model of a wing-body shape mounted in a wind tunnel. the flow conditions in the test sect...
Questions
question
History, 08.12.2021 18:50
question
Mathematics, 08.12.2021 18:50
question
Mathematics, 08.12.2021 18:50
question
Mathematics, 08.12.2021 18:50
question
Physics, 08.12.2021 18:50
Questions on the website: 13722359