subject
Engineering, 19.11.2019 05:31 885122bah

Saturated steam at a gauge pressure of 2.0 bar will be used to heat a stream of ethane. the latter enters a heat exchanger at 16 ° c with a gauge pressure of 1.5 bar at a rate of 795 m3 / min and is heated to constant pressure up to 93 ° c. the water vapor condenses and leaves the exchanger as liquid at 27 ° c. the specific enthalpy of ethane at the given pressure is 941 kj / kg at 16 ° c and 1,073 kj / kg at 93 ° c. a) how much energy should be transferred to ethane to heat it from 16 ° c to 93 ° c? b) assuming that all the energy transferred from the steam is used to heat the ethane, how much vapor in m3 / s should be supplied to the exchanger?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
question
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
question
Engineering, 04.07.2019 19:20
List 3 options on how to reduce knocking problens during engine process,
Answers: 2
You know the right answer?
Saturated steam at a gauge pressure of 2.0 bar will be used to heat a stream of ethane. the latter e...
Questions
question
Mathematics, 10.12.2021 23:10
question
Computers and Technology, 10.12.2021 23:10
question
Mathematics, 10.12.2021 23:10
question
English, 10.12.2021 23:20
Questions on the website: 13722359