subject
Engineering, 19.11.2019 05:31 drakesmith43

Ahorizontal curve on a two-lane highway (10ft lanes) is designed for 50 mi/h with a 6% superelevation. the central angle of the curve is 35 degrees and the pi is at station 11fccjukku11fccju kku page 4 of 5 482 + 72. what is the station of the pt and how many feet have to be cleared from the lanes’ shoulder edge to provide adequate stopping sight distance?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Ahorizontal curve on a two-lane highway (10ft lanes) is designed for 50 mi/h with a 6% superelevatio...
Questions
Questions on the website: 13722361