subject
Engineering, 20.11.2019 06:31 jake9919

Use the foregoing ph extension to describe a message dispatcher that works along the following lines: the dispatcher receives messages from two different channels and the checks the parity of each message. if the parity is wrong, it sends a “nack” (negative acknowledgement” through a reply channel (there is one such channel for each input channel); if the parity is right, it places the received message into a buffer. the buffer may store 10 messages. when the buffer is full, the dispatcher sends the whole contents of the buffer to a processing unit through another channel. no message can be placed into a full buffer.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
question
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
question
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
You know the right answer?
Use the foregoing ph extension to describe a message dispatcher that works along the following lines...
Questions
question
Mathematics, 26.07.2019 19:00
question
English, 26.07.2019 19:00
question
Mathematics, 26.07.2019 19:00
Questions on the website: 13722367