subject
Engineering, 20.11.2019 22:31 engbarthcobie

Exposure to high concentration of gaseous ammonia can cause lung damage. the acceptable short-term ammonia exposure level set by the occupational safety and health administration (osha) is 35 ppm for 15 minutes. consider a vessel filled with gaseous ammonia at 30 mol/l, and a 10-cm diameter circular plastic plug with a thickness of 2 mm is used to contain the ammonia inside the vessel. the ventilation system is capable of keeping the room safe with fresh air, provided that the rate of ammonia being released is below 0.2 mg/s. if the diffusion coefficient of ammonia through the plug is 1.3 x 10-10 m 2 /s, determine whether or not the plug can safely contain the ammonia inside the vessel.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Exposure to high concentration of gaseous ammonia can cause lung damage. the acceptable short-term a...
Questions
question
Business, 29.06.2021 16:20
Questions on the website: 13722367