subject
Engineering, 22.11.2019 06:31 muncyemily

3. the design criteria for oxidation ponds (also called facultative ponds, aerated facultative ponds) specified that (1) bod loading into the primary cell (or pond) shall not exceed 25 lbs bod/acre/day, (2) the minimum total water retention time, based on influent flow and all cells at water depth of 5 ft should not be less than 120 days., (3) the volume of winter storage between the water depths of 1.5 and 5 ft shall be sufficient so that no discharge is necessary for a four-month period, and (4) pond system should have at least two primary cells and one or more secondary cells. size the ponds for a community that generates 160,000 gpd wastewater with a bod of 220 mg/l. based on the climate of the area, the net water loss (evaporation plus seepage minus precipitation) during the storage months is 1.0 inch/month.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
3. the design criteria for oxidation ponds (also called facultative ponds, aerated facultative ponds...
Questions
question
Chemistry, 30.08.2019 08:30
Questions on the website: 13722367