Engineering, 23.11.2019 04:31 jason9394
An aluminum oxide bar with the same dimensions as the zirconium bar above is to be fractured in four-point bending, with the support span at 50.8 mm (2 in.) and the inner span at 25.4 mm (1 we expect its modulus of rupture to be approximately 413 mpa or 60,000 psi. at approximately what load will this bar fracture?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
You know the right answer?
An aluminum oxide bar with the same dimensions as the zirconium bar above is to be fractured in four...
Questions
Mathematics, 22.12.2020 20:10
Mathematics, 22.12.2020 20:10
Physics, 22.12.2020 20:10
Mathematics, 22.12.2020 20:10
Mathematics, 22.12.2020 20:10
History, 22.12.2020 20:10
Social Studies, 22.12.2020 20:10
History, 22.12.2020 20:10
English, 22.12.2020 20:10
Mathematics, 22.12.2020 20:10
Physics, 22.12.2020 20:10
