Engineering, 25.11.2019 18:31 zalbesifki12

Equal 1 cm2 areas of metals p and q are immersed together in sulfuric acid of unit h+ activity having no other dissolved oxidizers.
using the electrochemical parameters listed below:

(a) determine corrosion potential and corrosion rate (current density) for each, when they are uncoupled.

(b) when p and q are electrically coupled, determine the potential and current passing in the galvanic couple so formed.

(c) determine the corrosion rates (current densities) for p and q when the two are galvanically coupled.

(d) which metal is cathodically protected (i. e. its corrosion rate decreases) upon galvanic coupling?

exchange current densities for hydrogen evolution on p is 1x105 and on q is 1x106 a/cm2

exchange current densities for metal dissolution on p is 10-6 and on q is 2x10-6 a/cm2.

reversible potentials for anodic dissolution for p is-.45 and for q is -0.60 v vs she.

assume all tafel constants are 0.1 v per decade.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

You know the right answer?

Equal 1 cm2 areas of metals p and q are immersed together in sulfuric acid of unit h+ activity havin...

Questions