Engineering, 25.11.2019 20:31 frandariusscott
For a hollow round tubing with outer diameter do= 6 in and wall thickness t= 0.25 in that is welded to a plate with a fillet weld size ℎ = 0.25 in and weld strength sweld = 50 ksi, assume that failure occurs only in the weld. for the following loading conditions calculate the allowable force or moment before failure:
a.) axial loading, calculate fallow[#]
b.) pure bending, calculate mallow [in#]
c.) pure torsion, calculate tallow [in#]
Answers: 1
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
For a hollow round tubing with outer diameter do= 6 in and wall thickness t= 0.25 in that is welded...
History, 05.01.2020 20:31
Mathematics, 05.01.2020 20:31
History, 05.01.2020 20:31
English, 05.01.2020 20:31
Mathematics, 05.01.2020 20:31
Mathematics, 05.01.2020 20:31
Spanish, 05.01.2020 20:31
Mathematics, 05.01.2020 20:31
Biology, 05.01.2020 20:31
Geography, 05.01.2020 20:31
Chemistry, 05.01.2020 20:31
English, 05.01.2020 20:31