subject
Engineering, 25.11.2019 21:31 lance31

Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen that is discharged into a river that has a flow rate of 8.7 m/s and a flow velocity of 2.0 ft/sec. the river just upstream of the discharge has a dissolved oxygen concentration of 7.0 mg/l and a lo of 4.7 mg/l. the temperature of the river is 15 °c and the temperature of the wastewater discharge is 24.7 °c. the deoxygenation rate constant (base e) is 0.20 d at 20°c; the reaeration rate constant (base e) is 0.50 dat 20 °c. the bod rate constant (base e) is 0.20 d at 20 °c. assume that the thetas for rate constant temperature corrections are 1.047 for all rate constants. assume sea level and fresh water conditions. a. determine the initial oxygen deficit (mg/l) and the ultimate bod, lo (mg/l) just downstream from the discharge after blending b. the time (days) and distance (miles) to reach the minimum dissolved oxygen concentration. c. the minimum dissolved oxygen concentration (mg/l) d. the dissolved oxygen that could be expected 50 miles downstream from the discharge (mg/l). e. use excel to create a graph of do vs. time. note that this is y vs. x. be sure to label the y and x axis including units and show the excel spreadsheet used to create your graph. the work you show in your calculation in partc will serve as your sample calculation.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:20
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen tha...
Questions
question
Mathematics, 19.04.2021 18:30
question
Mathematics, 19.04.2021 18:30
question
Chemistry, 19.04.2021 18:30
question
Physics, 19.04.2021 18:30
Questions on the website: 13722367