Engineering, 25.11.2019 21:31 vava19

Supply air for a building is heated from state 1 to state 2 by an electric heater. given the conditions below determine the following.

--given values--

dry bulb: t1 (f) = 42

relative humidity: phi1 (%) = 75%

mass flow rate of air: ma1 (lba/h) = 1792

dry bulb: t2 (f) = 86

a) determine the specific volume of the air (ft^3/lba) at state 1. 12.727

b) determine the dew point temperature (f) for state 1 34.65

c) determine the wet bulb temperature (f) for state 1. 38.72

d) determine the humidity ratio at state 1. 00420351

e) determine the specific enthalpy (btu/lb) at state 1. 14.618

f) determine the specific enthalpy (btu/lb) at state 2.

g) determine the electric power (kw) required for the heater.

h) determine the electric current (amps) through the heater if the supply voltage is 220 v

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

You know the right answer?

Supply air for a building is heated from state 1 to state 2 by an electric heater. given the conditi...

Questions