subject
Engineering, 25.11.2019 21:31 littleprinces

Aerobic pond is used as a secondary wastewater treatment operation for small communities. the pond is usually shallow enough so that it can be assumed as a well-mixed aerobic reactor. the inflow rate of wastewater entering a 200m^3-aerobic pond is 50 m^3/d and has a substrate (so) concentration of 95 mg bod5/l. the microbe concentration (xo) in the influent is small and can be neglected. the microbial growth and substrate consumption in the pond can be described by the monod equations:
a. assuming the pond is in steady state, write mass balance equation for the microorganism concentration (x) and solve the equation to derive an expression for the substrate (s) concentration as a function of the hydraulic detention time. calculate s using the equation you derived. (ks=60 mgbod5/l, y=0.6 mg vss/mg bod5, k_d=0.06 day-1, mu_m=3 day-1)
b. write the mass balance equation for the substrate in the pond and solve it for the microbe concentration (x) as a function of the substrate concentration and hydraulic detention time. calculate x using the equation you derived.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
Aerobic pond is used as a secondary wastewater treatment operation for small communities. the pond i...
Questions
question
Computers and Technology, 20.02.2021 14:10
question
Biology, 20.02.2021 14:10
question
Mathematics, 20.02.2021 14:10
question
Mathematics, 20.02.2021 14:10
question
Mathematics, 20.02.2021 14:10
question
Computers and Technology, 20.02.2021 14:10
Questions on the website: 13722360