Engineering, 26.11.2019 00:31 kaya1523
Consider a fluid with mean inlet temperature ti flowing through a tube of diameter d and length l, at a mass flow rate . the tube is subjected to a surface heat flux that can be expressed as , where a and b are constants. determine an expression for the mean temperature of the fluid as a function of the x-coordinate.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Consider a fluid with mean inlet temperature ti flowing through a tube of diameter d and length l, a...
Questions
Mathematics, 20.10.2020 18:01
World Languages, 20.10.2020 18:01
Health, 20.10.2020 18:01
Geography, 20.10.2020 18:01
Mathematics, 20.10.2020 18:01
English, 20.10.2020 18:01
History, 20.10.2020 18:01
