Engineering, 26.11.2019 03:31 vitanoeymailcom705

Chlorine gas is to be heated from 120°c and 1 atm to 180°c. (a) calculate the heat input (kw) required to heat a stream of the gas flowing at 15.0 kmol/min at constant pressure. (b) calculate the heat input (kj) required to raise the temperature of 15.0 kmol of chlorine in a closed rigid vessel from 120°c and 1 atm to 180°c. (suggestion: evaluate δû directly from the result of the first calculation, so that you do not have to perform another integration.) what is the physical significance of the numerical difference between the values calculated in parts (a) and (b)? (c) to accomplish the heating of part (b), you would actually have to supply an amount of heat to the vessel greater than the amount calculated. why?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

Chlorine gas is to be heated from 120°c and 1 atm to 180°c. (a) calculate the heat input (kw) requir...

Questions