Engineering, 26.11.2019 03:31 rubiim9610

Arefrigerator door has a height and width of h = 1 m and w = 0.65 m, respectively, and is situated in a large room for which the air and walls are at t_infinity = t_sur = 25 degree c.
the door consists of a layer of polystyrene insulation (k = 0.03 w/m cdot k) sandwiched between thin sheets of steel (epsilon = 0.6) and polypropylene.
under normal operating conditions, the inner surface of the door is maintained at a fixed temperature of t_s, i = 5 degree c.

a) estimate the heat transfer through the door for the worst-case condition corresponding to no insulation (l = 0).

b) estimate the heat transfer and the outer surface temperaâture for an insulation thickness of l = 15 mm.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Arefrigerator door has a height and width of h = 1 m and w = 0.65 m, respectively, and is situated i...

Questions