Engineering, 26.11.2019 05:31 xxaizuwu
Astack is a type of data collection on which things can be "pushed" and "popped". for example, a stack of plates can have a plate added (or "pushed") onto the stack, and a plate removed (or "popped") from the stack. plates are pushed onto or popped off of the stack one at a time. the last plate pushed onto the stack is the first plate popped off of the stack. this type of structure is known as "lifo" – last in, first out.
in this project, you will create a stack that will hold objects of type person. the stack itself will be in a class named personstack.
when manipulating the stack, three types (or classes) of exceptions can be thrown. each exception class will contain two constructors, one which provides a default message for the exception, and one which takes a string as an argument and sets the exception message to that string.
the three exception classes in this project are:
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
Engineering, 04.07.2019 19:20
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
You know the right answer?
Astack is a type of data collection on which things can be "pushed" and "popped". for example, a sta...
Questions
Business, 13.03.2020 21:22
History, 13.03.2020 21:23
Mathematics, 13.03.2020 21:23
