Engineering, 26.11.2019 05:31 plzzhelp7931
Aw254x 33 structural steel (e =200 gpa) section is used for a column with an actual length of 6 m. the column can be considered fixed at both ends for bending about the axis of the cross section with the smallest second moment of area and pinned at both ends for bending about the axis with the largest second moment of area. determine the maximum axial compressive load p that can be supported by the column if a factor of safety of 1.9 with respect to failure by buckling is specified.
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Aw254x 33 structural steel (e =200 gpa) section is used for a column with an actual length of 6 m. t...
Biology, 28.01.2021 20:40
Mathematics, 28.01.2021 20:40
Mathematics, 28.01.2021 20:40
Mathematics, 28.01.2021 20:40
Mathematics, 28.01.2021 20:40
World Languages, 28.01.2021 20:40
Mathematics, 28.01.2021 20:40
Mathematics, 28.01.2021 20:40
Biology, 28.01.2021 20:40
Social Studies, 28.01.2021 20:40