Engineering, 26.11.2019 05:31 antoinewill05

Electrospray ionization and atmospheric pressure chemical ionization are two methods that are used to introduce the eluate from the liquid chromatography column into a mass spectrometer. which ionization method typically requires analyte ions to be in solution prior to reaching the interface between the columrn in liquid chromatography and the mass spectrometer? o atmospheric pressure chemical ionization o neither of the interfaces o electrospray how are neutral species in solution converted to gaseous ions in the other ionization ucthod? o a high voltage is applied to a needle in the path of the aerosol. an electric corona forms around the charged needle which injects electrons into the acrosol and creates ions. o neutral species are exposed to high energy protons which cause ionization by removing an clectron from neutral molecules. o analyte molecules are bombarded with 70 ev electron 。the other interface does not convert neutral species in solution to gaseous ions.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

You know the right answer?

Electrospray ionization and atmospheric pressure chemical ionization are two methods that are used t...

Questions