Engineering, 26.11.2019 06:31 Crxymia
1.astructural component is fabricated from an alloy that has a plane strain fracture toughness of it has been determined that this component fails at a stress of 300 mpa when the maximum length of a surface crack is 0.95 mm. whatis the maximum allowable surface crack length (in mm) without fracture for this same component exposed to a stress of 300 mpa and made from another alloy with a plane-strain fracture toughness of 51mpa/m?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
1.astructural component is fabricated from an alloy that has a plane strain fracture toughness of it...
Questions
Computers and Technology, 25.03.2021 18:50
History, 25.03.2021 18:50
Biology, 25.03.2021 18:50
Computers and Technology, 25.03.2021 18:50
Mathematics, 25.03.2021 18:50
Chemistry, 25.03.2021 18:50
Geography, 25.03.2021 18:50
