An air conditioner operating at steady state takes in moist air at 28oc, 1 bar, and 70% relative humidity. the moist air first passes over a cooling coil in the dehumidifier unit and some water vapor is condensed. the rate of heat transfer between the moist air and the cooling coil is 11 tons. saturated moist air and condensate streams exit the dehumidifier unit at the same temperature. the moist air then passes through a heating unit, exiting at 24oc, 1 bar, and 40% relative humidity. neglecting kinetic and potential energy effects, determine:

(a) the temperature of the moist air exiting the dehumidifier unit.
(b) the volumetric flow rate of the air entering the air conditioner, in m3/min.
(c) the rate water is condensed, in kg/min.
(d) the rate of heat transfer to the air passing through the heating unit, in kj/min.

answer: hi

explanation:

answer:

2d

explanation:

answer:

in baseband transmission the whole bandwidth of the cable is utilized by a single signal. eg.Ethernet is using Basebands for LAN.

In the broadband transmission, multiple signals are sent on multiple frequencies simultaneously using a single channel. eg.Digital Subscriber Line (DSL)

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.