Engineering, 27.11.2019 04:31 kgarc1019
Air is compressed by an adiabatic compressor from 95 kpa and 27°c to 600 kpa and 277°c. assuming variable specific heats and neglecting the changes in kinetic and potential energies, determine
(a) the isentropic efficiency of the compressor and
(b) the exit temperature of air if the process were reversible.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Air is compressed by an adiabatic compressor from 95 kpa and 27°c to 600 kpa and 277°c. assuming var...
Mathematics, 16.04.2021 16:00
History, 16.04.2021 16:00
Chemistry, 16.04.2021 16:00
Spanish, 16.04.2021 16:00
Mathematics, 16.04.2021 16:00
Arts, 16.04.2021 16:00
Mathematics, 16.04.2021 16:00
History, 16.04.2021 16:00
Mathematics, 16.04.2021 16:00
Mathematics, 16.04.2021 16:00
Physics, 16.04.2021 16:00
Mathematics, 16.04.2021 16:00
Social Studies, 16.04.2021 16:00