Engineering, 28.11.2019 01:31 JamierW2005
Given the following information for an oblique cutting operation: normal rake angle = -12 degrees, angle of inclination = 15 degrees, width of cut = 0.15 inches, depth of cut = 0.05 inches, fc = 650 lbs, ft = 380 lbsdetermine: a) the equivalent rake angle b) the forces on the tool face c) the friction angle d) the shear angle e) the shear stress and normal stress on the chip.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
You know the right answer?
Given the following information for an oblique cutting operation: normal rake angle = -12 degrees, a...
Questions
Chemistry, 12.03.2020 05:29
Mathematics, 12.03.2020 05:29
Mathematics, 12.03.2020 05:29
Mathematics, 12.03.2020 05:29
