subject
Engineering, 28.11.2019 06:31 yeidiyan9490

Steam is to be condensed on the shell side of a heat exchanger at 75°f. cooling water enters the tubes at 50°f at a rate of 46 lbm/s and leaves at 65°f. assuming the heat exchanger to be well insulated, determine the rate of heat transfer in the heat exchanger and the rate of condensation of the steam. the specific heat of water is 1.0 btu/lbm·°f and the enthalpy of vaporization of water at 75°f is 1050.9 btu/lbm. the rate of heat transfer in the heat exchanger is btu/s. the rate of condensation of the steam is lbm/s.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Steam is to be condensed on the shell side of a heat exchanger at 75°f. cooling water enters the tub...
Questions
Questions on the website: 13722362