A50 wt% ni–50 wt% cu alloy is slowly cooled from 1400°c (2550°f) to 1200°c (2190°f).
(a) at w...
Engineering, 28.11.2019 06:31 dunk36
A50 wt% ni–50 wt% cu alloy is slowly cooled from 1400°c (2550°f) to 1200°c (2190°f).
(a) at what temperature does the first solid phase form?
(b) what is the composition of this solid phase?
(c) at what temperature does the liquid solidify?
(d) what is the composition of this last remaining liquid phase?
Answers: 3
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Chemistry, 22.09.2020 21:01
Mathematics, 22.09.2020 21:01
Mathematics, 22.09.2020 21:01
Mathematics, 22.09.2020 21:01
Geography, 22.09.2020 21:01
Mathematics, 22.09.2020 21:01