subject
Engineering, 28.11.2019 23:31 corban13

Ethanol is produced commercially by the hydration of ethylene:

c2h4+h2o--> c2h5oh

some of the product is converted to diethyl ether in side reaction

2c2h5oh--> (c2h5)2o+h2o

the feed to the reactor contains ethylene, steam, and an inert gas. a sample of the reactor effluent gas is analyzed and found to contain 43.3 mole% ethylene, 2.5% ethanol, 0.14% ether, 9.3% inerts, and the balance water.

a. take as a basis 100 mol of effluent gas, draw and label a flowchart, and do a degree-of-freedom analysis based on atomic species to prove that the system has zero degrees of freedom?

b. calculate the molar composition of the reactor feed, the percentage conversion of ethylene, the fractional yield of ethanol, and the selectivity of ethnaol production relative to ether production?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
Ethanol is produced commercially by the hydration of ethylene:

c2h4+h2o--> c2h5oh
Questions
question
Mathematics, 25.07.2019 17:30
Questions on the website: 13722363