Engineering, 29.11.2019 01:31 rizha55
Consider a hypothetical material that has a grain diameter of 6.3 ´ 10-2 mm. after a heat treatment at 500°c for 4 h, the grain diameter has increased to 1.10 ´ 10-1 mm. compute the grain diameter when a specimen of this same original material (i. e., d0 = 6.3 ´ 10-2 mm) is heated for 5.5 h at 500°c. assume the n grain diameter exponent has a value of 2.0
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
You know the right answer?
Consider a hypothetical material that has a grain diameter of 6.3 ´ 10-2 mm. after a heat treatment...
Questions
Physics, 20.07.2019 19:30
Chemistry, 20.07.2019 19:30
Chemistry, 20.07.2019 19:30
Chemistry, 20.07.2019 19:30
Computers and Technology, 20.07.2019 19:30
English, 20.07.2019 19:30
Social Studies, 20.07.2019 19:30
Social Studies, 20.07.2019 19:30
History, 20.07.2019 19:30
Mathematics, 20.07.2019 19:30
