Afour-lane divided multilane highway in rolling terrain has five access points per mile and 11-ft lanes with a 4-ft shoulder on the right side and 2-ft shoulder on the left. the peak-hour factor is 0.84 and the traffic stream consists of 6% trucks, 4% buses and 3% recreational vehicles. the driver population adjustment factor is estimated at 0.90. if the analysis flow rate is 1250 pc/h/ln, what is the peak-hour volume?

(a)976 veh/h

(b)1345 veh/h

(c)1389 veh/h

(d)1779 veh/h

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody