Engineering, 30.11.2019 00:31 lamwil9432

Abalanced bank of delta-connected capacitors is connected in parallel with the load described in assessment problemthe effect is to place a capacitor in parallel with the load in each phase. the line voltage at the terminals of the load thusremains at 2450 v. the circuit is operating at a frequency of 60 hz. the capacitors are adjusted so that the magnitude ofthe line current feeding the parallel combination of the load and capacitor bank is at its minimum. a) what is the size of each capacitor in microfarads? b) repeat (a) for wye-connected capacitorsc) what is the magnitude of the line current? problemthe magnitude of the line voltage at the terminals of a balanced y-connected load is 6600 v. the load impedance is 240 —170 ﬂ/¢. the load is fed from a line that has an impedance of 0.5 + i4 q/¢,a) what is the magnitude of the line current? b) what is the magnitude of the line voltage at the source?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

You know the right answer?

Abalanced bank of delta-connected capacitors is connected in parallel with the load described in ass...

Questions