subject
Engineering, 30.11.2019 02:31 ingridx0

Argon and methane are absorbed from nitrogen into liquid ammonia at 252.3 k and 175.0 atm. feed rate of gas is 100 kmol/h. feed gas contains 0.020 mol% ar and 0.130 mol% methane. outlet gas contains 0.0008 mol% methane. the entering liquid ammonia is pure. the system operates with l/v = 26.0. assume l and v flow rates are constant. equilibrium data for methane is, partial pressure methane = 3600 atm and the partial pressure for argon = 7700 atm. a. find the outlet mole fraction of methane in the liquid b. find the number of equilibrium stages required. c. find the outlet mole fraction of argon in the gas.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
Argon and methane are absorbed from nitrogen into liquid ammonia at 252.3 k and 175.0 atm. feed rate...
Questions
question
Mathematics, 15.07.2019 02:30
Questions on the website: 13722363