Engineering, 01.12.2019 20:31 lollyp5439
a ball of 0.900 kg slides horizontally over a frictionless surface and bumps into a heavy stone at a speed of 20.0 m / s. the ball returns with 70.0% of its initial kinetic energy. how big is the change in the impulse of the stone?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
a ball of 0.900 kg slides horizontally over a frictionless surface and bumps into a heavy stone at a...
Questions
Mathematics, 09.10.2019 17:30
Mathematics, 09.10.2019 17:30
Mathematics, 09.10.2019 17:30
English, 09.10.2019 17:30
English, 09.10.2019 17:30
Social Studies, 09.10.2019 17:30
Mathematics, 09.10.2019 17:30
Social Studies, 09.10.2019 17:30
Mathematics, 09.10.2019 17:30
English, 09.10.2019 17:30
